It's time for another Paper Pros Challenge and the theme this month was set by Karen Aicken, who challenged us to make a card celebrating Spring, using blooms and/or butterflies.
I decided to get a jump on Mother's Day with a Butterfly Double Pivot Card for my Mom.
This technique is simple, and you can watch three different videos on how to do it on this post: Double Pivot Cards. The videos will show how to create the accordion card first, then die cut each half. For my card, I was using a thick cardstock so I decided to die cut each card separately and then join them together. I'll explain how I did it.
First, I cut an 8.5" x 11" piece of pink cardstock in half, making two 5.5" x 8.5" strips. On each strip I scored at 4" and then at 7.5", creating a card with a 4" panel, a 3.5" panel, and a leftover 1" strip (the tab). I arranged the strips so one had a right-facing tab and one had a left-facing tab and then added 3" x 4.5" pieces of patterned paper (SEI Vanilla Sunshine) to each panel, using a temporary removable tape. I die cut the Butterfly Pivot Card into each card, making sure I measured the distance from the die to the top of the card so I could duplicate it for the other side. After die cutting I removed the patterned paper rectangles and snipped out the butterflies from the patterned paper. This left me with two pieces from each rectangle - one to fit above the butterfly and one to fit below the butterfly. I glued the patterned paper pieces onto the cards, creating the patterned background.
To join the two Pivot Cards I first trimmed off the side panel from one of the cards (either one - doesn't matter) and then used the other card's tab to join the two, trimming the tab as necessary to avoid the butterfly area. To join the pivoting butterflies themselves, each one had a small tip of the wing that had crossed the fold, so it was just a matter of choosing one to be the tab and trimming the other one away. Here's a view of the back of the card, showing the connections.
The Butterfly Pivot Card comes with decorator butterfly dies, so I used those with the leftover patterned paper and a piece of glitter paper from my stash to decorate the card. I incorporated a few smaller butterflies from the Butterfly Accessory die set, which perfectly coordinates.
A Double Pivot Card is impressive, but easy. (My favorite combination!) For the front of the card I kept it very simple with just a couple of strips of patterned paper and a ribbon.
Remember that Pop it Ups dies are only available in 2017 or until they're gone, whichever comes first, and while I am not ruling out the option of a re-release on certain styles, I can pretty well say for certain that the Butterfly Pivot Card will not be one of those re-released styles. So I guess I'm saying . . . get it if you want it! I'll include some Amazon links below, or you can always find great deals on my dies at It's Cheaper than Therapy.
Want to check out the other great cards by the Paper Pros? Remember this is a no-stress, no-committment challenge, so not everyone participates. The links to the other Paper Pros blogs are in the sidebar at the left.
Happy Pi Day! I am supposed to be posting a pi/pie-themed card today for the Paper Pros challenge in honor of Pi Day, but preparing the class kits for tomorrow's "Pop-ups 3 Ways" class at Scrapp'n Savvy took much longer than expected, so I ran out of time to make a card. Instead, I'm posting the photos for tomorrow's class.
This class focuses on three different ways to make pop-up cards - with templates, with dies and with SVG files.
For the template card, I took inspiration from a card made by my cousin Jessica. I added an extra element of interactivity by incorporating a spinner cut on the upper fold. As the card opens, one of the flowers spins up above the card.
For the die card, I used the Lucy Label Pop-up die set along with the Hot Air Balloon die set for a birthday card.
For the SVG card, I converted one of my earliest Sizzix dies, the Pop-up House, into an SVG file that can be cut on all the major electronic cutting machines.
Students should bring the following tools/supplies to class:
Scissors Fine glue bottle/pen Pop dots Tape runner/tape Scoring tool & ruler Craft knife & cutting mat Paper piercer Sanding block Die cutting machine with plates/platforms for wafer-thin dies Removable tape to hold dies in place (or magnetic platform if you prefer) Wink of Stella pen for sparkle (optional) Inks for edges (optional) Photos of the cards from this blog or from the e-mail (print or access on a phone or tablet) - you do not need to print the templates - they will be provided in class
The former Pop it Ups Designer Challenge team has regrouped as a friends group called Paper Pros and today is the first of our monthly no-pressure challenges. Summer Hills-Painter challenged us to "Shake it Up" by incorporating a shaker element or action wobbler into a project of any theme.
This is a version of a Twist Circle Window Card (Video Link) but as a shaker card instead. I started with a 4.75" x 12" strip of patterned paper (Authentique Legacy "Kindred") and scored it into three 4" panels. I cut the base of the Twist Circle die over the right fold and cut the upper portion of the platform from the leftover paper. Next I folded the left panel underneath the center panel and die cut through both layers with the medium circle die from the Twist Circle set. Between the two layers I added a square made from two transparency pieces sealed around the edges and filled with silver confetti and micro beads. I made a similar shaker label by cutting the label out of both patterned paper and transparency and then hand stitching the two together with yellow thread. This was easy because the label die creates decorative pierce marks around the perimeter. Before stitching the top edge of the label I used a paper funnel to fill it with the same silver confetti and micro beads.
The card measures 4.75" x 4" when closed, so it will mail easily in an A2 envelope. The greetings are from a Stampin' Up! set from my stash called Sale-a-Bration "A Happy Thing"
Here's a close-up of the window area when the card is closed. The flower embellishment is visible through the window in the upper right.
As the card is opened the Twist Circle mechanism starts to lift and twist the interior shaker label.
Once the card is open the flower has moved to the left side and the "Love Life" (same stamp set) greeting is revealed. I also added flourishes from the Merry Christmas Pop-up die set. The flowers themselves are a combination of silk and paper flowers from my stash.
Here's a close-up of the shaker label:
Also, congratulations to Lana R. for winning two dies in the 25,000 YouTube Subscribers giveaway from the last newsletter. Here is Lana's winning comment, chosen by random draw:
"Your cards are amazing! But I am a little intimidated by them."
Lana, I hope you've had a chance to try your dies and that you're no longer intimidated!
I mentioned on Social Media that I recently achieved a goal of 25,000 YouTube subscribers! Whoo hoo! Thanks, all. At the end of this post are details about a Giveaway.
To celebrate, here's a new video tutorial for combining the Flower Pot Pop Stand die set plus the Heart Pivot Card decorator dies to make a pop-up heart-filled flower pot with extra pop-up hearts attached to the front of the flower pot.
The patterned papers I used are older designs from My Mind's Eye from "The Sweetest Thing" collection, but any patterned papers could be used in this design. The card measures 5" x 6" in the closed position and can be mailed in an A7 (5x7) envelope. The front decoration features an embossed border strip (Stampin' Up! embossing folder), two hearts from the Heart Pivot Card set with vines from the Flower Pot Pop Stand set, and a metal key from my stash.
As the card is opened the flower pot starts to raise and expand.
Once open, the pop-up sculpture is revealed, including extra heart pop-ups built on the front of the pot so they, too, will pop-up. The "love" is an older script die (Stampin' Up!) from my stash.
The video shows a technique for cutting notches in the small hearts to be able to make the interlocking hearts to go in the flower pot.
This side view shows the "feet" that I added to the back of the large decorator hearts to turn them into pop-up hearts for the front of the flower pot. This technique is explained in the video.
This card would be suitable for many occasions, including Valentines Day, Anniversary, Mother's Day, Birthday, Thanks, Love and Thinking of You.
GIVEAWAY: Leave a comment on this post to be entered into a random drawing to win the two dies featured in the video - Flower Pot Pop Stand and Heart Pivot Card. Leave your comment by the end of the week, Friday, February 3, 2017 at 5 pm CST. The winner will be chosen by random number generator and dies will be sent out as soon as we can connect by e-mail to get your mailing address.
I know, I know. You've probably noticed a few changes, most notably the lack of Designer Challenges and no sneak peeks or hints from me about new products.
After three years of licensing Pop it Ups dies, stamps, folders and stencils to Elizabeth Craft Designs, the contract is up and we've mutually decided not to renew. This means there won't be any new Pop it Ups collections with Elizabeth Craft Designs, but existing products will be available, inventory-permitting, throughout 2017.
I've been designing and licensing craft products for fifteen years and have been blessed to work with many companies. I've designed and licensed hundreds of products. Before product design, I worked in the creative side of the industry, including design team work, magazine and idea books and freelance teaching at events throughout the world.
My goal when I turned my crafting hobby into a career was to earn enough to fund my kids' college accounts. John and I put ourselves through school on scholarships, grants and loans. I remember the day, 10 years after graduating, when we paid off our last loan. John's mother framed the payoff stub for us and we hung it on the wall. When our twins were born 18 years ago we made the decision that, if we could, and with provisions for their contributions of hard work and decent grades, we would pay for our kids' college educations. We met that goal and their college accounts are fully funded. Yay!
Now don't worry. I didn't tell this story to announce my retirement or anything. Perish the thought! I love creating with paper and now that my kids are young adults and starting their own journeys, I'll have even more time to devote to it.
No, I tell this story to explain why, when it became obvious that my journey with Elizabeth Craft Designs was ending, I didn't feel the need to immediately pursue a replacement licensing deal, as I've done in the past. To explain why I chose instead to take my time and weigh several options of where to best focus my particular set of skills in this ever-changing industry.
What's next for me is in development, but there is something coming and it will be great!
During this transition period, I won't have work for a Design Team, so there is no longer an official Karen Burniston Designer Challenge Team. After years of working together, though, we've become such good friends that we've formed our own little club and are considering putting together regular challenges just for fun. You'll see in the sidebar that my former team members are now linked as "Super Talented Designer Friends" and I encourage you to bookmark their blogs so you can keep up with their crafty endeavors. There aren't enough words to properly praise and thank them for their years of friendship, talents and support. Thank you SO much to Shelly, Raquel, Kelly, Karen, Fran, Frances, Summer, Caz, Sandy, Donna and Helen. I also must thank all of my readers, viewers, students and fans who have supported this passion I have for interactive paper crafting.
While I work on what's next, I'm going to continue to enjoy creating YouTube videos and tutorials for my blog. I'll continue to post on my Karen Burniston Designer Facebook Page with links to projects made using my products. I'll continue to teach at stores in South Texas (next class is at Scrapp'n Savvy in March) and I'll be attending the Creativation show next week in Phoenix to walk the show with my friends and to celebrate, gratefully, the blessings that this creative industry has provided.
Today I'm sharing a Twist Circle Panel Card in a Love theme.
Shelly mentioned that the Simon Says Stamp Monday Challenge Blog had a theme of Be Square, so I thought I'd adapt the measurements of the Twist Circle Panel Card video to be a square card with square panels and enter it into the Challenge.
This is a top fold 4.5" square card with a ribbon tie closure. The front features layered heart stamps from a Dina Wakley set, plus a key charm from Hobby Lobby.
When the card is opened the panels twist and open. The laser-cut wood letters came from Michaels and I painted them to match my project colors. The patterned papers are older from my stash - Teresa Collins.
For the Twist Circle Panel card itself, I followed the video instructions, with these changes to the dimensions:
Backing Card: 4.5" x 4.5", scored for folding in the center with 5 closely-spaced score lines to create a rolling fold to accommodate the thick wooden letters in the closed position. (NOTE: If you're not using thick items on the panels, there is no need for a rolling fold - simply score once in the center of the backing card)
Inner Card: 4.25" x 4.25", scored for folding in the center.
Arms: 1.25" x 3.75", scored for folding lengthwise up the center
Interior Pop-up Panels: 8" x 2", scored every 2".
Here is the video tutorial for converting the Pop it Ups Twist Circle die into a base for a panel card. If you're making the square version, make the appropriate measurement substitutions listed above.
Here are some shopping links for the products used on my Love card:
Well 2016 is nearly over and our final Pop it Ups Designer Challenge is full of fun! Sandy Diller set the theme of "Party Animals - use any of the Character dies for a card celebrating New Years or anything else"
For my card I wanted to show yet another way to adapt the Twist Circle Pop-up die set. This time I'll use it without the upper platform and instead I'll add spirals to the lower platforms. This generic card design could be used for any theme. I decorated mine for New Year's using Hoppy the Frog and the decorator pieces from the Anita Frames. It would make an adorable Valentines card with hearts decorating the spirals.
The front of my card features the same confetti patterned paper (SEI 8-6909 from my stash) as the card's interior. I cut the patterned paper into two pieces to allow the frog to be tucked behind the title. I added his front legs, trimmed and folded, to look like he's holding the greeting. "Happy New Year" is spelled out in (very old) letter stickers from my stash and Hoppy's eye sockets, cut from gold paper, created the perfect confetti in between the letters.
As the card is opened, the Twist Circle lower platforms start to pop-up, causing the spirals to expand.
Once open, the spirals expand and the frogs pop-up. The banners suspend between the spirals, spelling out the year to come. The greeting comes from an older Stampin' Up! set called "Lovely Amazing You" - I thought it was the perfect greeting for a new year full of promise.
I explain in the video about the banners. If you're stringing 3 banners they fit nicely between the spirals - simply attach the string to the spirals and hang the banners between. However, if 4 banners are required, it took a little extra engineering. Basically I needed to anchor the "2" banner, but that meant it wouldn't be able to shift locations when the card closed. To allow for the other banners to shift, I needed the string to be able to slide through the "2" banner to give slack to the other three so they can find a good resting position when the card is closed. Because the string is anchored to the card, it will pull the slack out of the banners as the card is opened and raise them into the air.
This card design is very generic and can be decorated for any theme. You need only the Twist Circle for the mechanism, but if you're interested in replicating this exact card, here are the items you'll need:
Just a quick note about these 9 amazing ladies. Most of them have been on my team since my Sizzix days and we've been posting monthly Designer Challenges for years! Every month for the last three years this team has posted jaw-dropping projects promoting Pop it Ups and Elizabeth Craft Designs. What an honor to have these beautiful people showing off my products in such clever and creative ways. They are my best friends and I couldn't have done it without them.
Sandy Diller set the theme this month and then created this absolutely amazing card featuring several Character dies and a Hee Haw theme. She doubled the Lots of Pops using a clever box cut in the center of the card. So fabulous!
Frances Byrne created a Z-fold card and then cut the Tags Pivot Card into the panels to animate her greetings. Jinks the Monkey and his pals are partying on the front of the card. As usual, Frances found the perfect mix of papers, stamps and dies for an awesome card.
Karen Aicken is ushering the new year with a stylish card featuring kraft and red with black accents. So many great details in this card - I love the pink bubbly and the styling on Jinks. The Hanging Charm Pull Tab provides the base.
Raquel Mason shows Jinks the Monkey's true party instincts with this fun Oval Pull Card featuring a background of embossed bananas and an inverted monkey flying on the slider arm. I am bananas for this card!
Fran Sabad created a stunning New Year's card featuring black and gold accents and the Clock die turned into a shaker! I love the way she used the Anita Frames pop-up to highlight the date inside the card. The Party Animals have a couple of hours left!
Shelly Hickox is celebrating the new year by getting organized with her planner. She created these adorable Character planner clips using a woodlands styling on Honey the Bear and Dutch the Fox. I like the addition of Chilly the Penguin's scarf to Honey as well. This makes me want to become a planner girl!
Caz Counsell ends the year and the Designer Challenges with this fabulous ode to the team, featuring 10 different "spirit animals" representing all of us. She die cut the Lots of Pops across the card several times to give plenty of platforms. I adore this card almost as much as I adore this team!
At year's end it's always a great time to reflect on the journey, and it's been marvelous!
This month I've been revisiting some of my favorite technique videos and making Christmas versions of the cards. Today's share is an amped-up version of the Twist Circle Panel Card where I added two Evergreen Pivot Card cuts into the panels, giving it an extra layer of interactivity.
This card is a top-fold A2 (4.25" x 5.5") but because of the bulk, it will need a larger envelope and extra postage. I kept the front very simple, with a stamped layered label set (Labels & circles), ribbon and some evergreen trees (Evergreen Pivot Card).
As the card is opened, the panels start to twist and lift up. I made sure that my ribbon bow was high enough that the twisting labels will not hit it.
Once the card is opened fully, the panels will expand and the trees pop-up, creating a fun zigzagging double pop-up.
To create the burlap/glittered trees, I first added double-sided adhesive to a piece of cardstock and then pressed a piece of burlap into the adhesive. I die cut the decorator trees using the Precision Plate in my Big Shot to make sure it would cut the burlap and cardstock completely. After die cutting I poured glitter through the burlap to stick to the leftover adhesive. I alternated between two colors of glitter (Imperial Garnet and Light Brass) to give the line of trees some variety. The Evergreen Pivot Card includes a die to cut stars for the tops of the trees.
The patterned paper I used is a very old piece of Lily Bee Design paper (Jingle egg nog) from my stash. I used the smaller snowflake die from the Holiday Charms set to die cut the maroon snowflakes from the leftover patterned paper and sprinkled snowflakes throughout the card. The Merry Christmas stamp is also an older design (Stampendous) from my stash. I stamped and embossed it onto maroon cardstock and then cut it into a tag shape.
From the side you can really see the layers of dimension to this card. The outer two panels are connected to the arms of the Twist Circle Panel Card in the usual manner. The label on the base of the card is inlaid so make sure it is not a catch point. I embossed the "Dec 25" stamp and left room to sign the card with a white gel pen.
For the Twist Circle Panel card itself, I followed the video instructions, with these changes to the dimensions:
Backing Card: 4.25" x 11", scored for folding at 5.5" (making an A2 top fold card)
Inner Card: 4" x 10.75", scored for folding at 5 3/8" (center)
Arms: 1.25" x 4.5", scored for folding lengthwise up the center
Interior Pop-up Panels: 10" x 3", scored at 2.75", 5" and 7.25" to make four panels (outer two panels are 2.75" wide and inner two panels are 2.25" wide) with corners rounded with 1/2" radius
Here are some step-by-step photos for how to cut the Evergreen Pivot Card die into the panels.
Step 1: After scoring to make the 4-panel strip, line up the Evergreen Pivot Card alignment nubs on the right-most fold line, using temporary adhesive to hold the small trees in place. Fold the other three panels underneath as shown above. Roll through a die cutting machine to die cut the small trees through two panels.
Step 2: Open the panel set up and move the die to the left-most fold, taping down the small trees so they don't shift. Fold under the left-most panel and pull the small tree that is already die-cut over the top of the die so it won't be cut again. Roll through the machine.
Step 3: Turn the panel set over so you're working on the back of the piece. Use clear tape to join the small trees in the center. Add cardstock panels to the outside edges. The panels should measure 1.25" wide by 3" tall.
Step 4: Turn the panels back to the front again. Start working the folds between the trees to create the pop-ups as shown. You'll have to create your own fold between the two outermost trees. This can be scored if you prefer, but I just used my fingers to create the folds.
Step 5: Turn the panels to the back again. Cut four cardstock strips, each measuring 1.5" x 3" and add them to the back of the panels. Make sure the adhesive is added to the panels so you can avoid the tree areas with adhesive.
Step 6: Decorate the panels as desired. I used washi tape (stash item) across the top and bottom edges of my panels and then rounded the corners with a 1/2" corner rounder. To add the small burlap trees in the very center, the interior side of each tree had to be trimmed so it wouldn't cross the fold.
Once I had my panel set completely decorated, I followed the video instructions for creating the base of the card (Twist Circle) and adding the panels. I reinforced all of my arms with patterned paper (this is shown in the video).
Ready to give this amped up version of the Twist Circle Panel Card a try? Here are the items from my Christmas Version that I was able to source.
Can you believe it's just a couple of weeks until Christmas? The month is flying by but the team and I took a moment from the hustle and bustle to contemplate our own lists . . . what would we want for Christmas from the Pop it Ups line if we didn't already have it? That was the challenge I issued the team - use your favorite Pop it Ups die.
For my card I was very torn - I love all of my dies! In the end I chose two favorites - the Lorna Label Pop-up and the Christmas Trees Pop Stand. The Lorna label was chosen for two reasons - first, it is named after my late Grandmother, Lorna Madsen, who was one of my very favorite people, and secondly, because I love the shape and generic versatility of the die. My other favorite is the Christmas Trees Pop Stand. I love the way the trees expand in this set, giving an extra dimension to the pop-up.
This card is a top-fold A2 card, measuring 4.25" x 5.5" when closed. The front design is a repeat of elements inside, a "simple lead-in" approach that I use often.
A piece of sparkly silver ribbon is used for a simple closure. I added hook and loop tape to the ends of the ribbon. To make it easy to lift, I added a loop of ribbon to one end, embellished with the small snowflake from the Holiday Charms set. The ribbon is anchored on the back of the card.
As the card opens the trees start to pop-up. Doubling the Lorna Label is such an easy way to create a floating floor to animate anything. I can see this card design being used for so many themes. Swap out the trees with little stamped images and create an impressive layered scene!
In the open position the trees expand, creating even more dimension to the card. I wrapped some silver twine around the lower Lorna label. The little greeting stamps from Stacy Yacula (POD) were the perfect size to fit in the fishtail banner die from the Lorna set.
Here is a side view showing how "L" supports work with a floating floor. You simply need a slot and a support and then anything can pop up anywhere on the floor. The foot of each support is glued to the base of the card. The floor (in this case, the Lorna label) will pull the support up as the card is opened and push it down as the card is closed.
The trees and snowflakes are cut from a piece of white cardstock that was first coated, front and back, with Sparkle Mod Podge. I love the hint of sparkle that the embedded glitter provides. All of the ornaments are Glitter Dots in Transparent/Silver.
It's a great time to stock up on Pop it Ups holiday dies during the Elizabeth Craft Designs sale, going on through 12/23/2016. Both the Christmas Trees Pop Stand and the Holiday Charms are included in the sale.
As usual, you are going to be blown away by the team's projects. We are especially happy to have Kelly Booth back, who took some time off for health reasons. The talent and creativity of these nine designers is astounding.
Frances Byrne mentioned that it was hard for her to choose a favorite die, but settled on the Twist Circle. She converted it into a panel card and then decorated with several Pop it Ups accessory dies, including Rudy the Reindeer. Frances always chooses the perfect papers for her cards. I am amazed at how she layers and composes a card.
Kelly Booth fell in love with the Flower Pot Pop Stand die as soon as it was released mid-summer and has made so many amazing cards with it. A signature Kelly touch is to add the spinner die from the Rectangle Pull Card to the side of the pot for even more interactivity. For this delightful card she used Jinks the Monkey on the front of the card and bright festive blooms inside. Amazing!
Sandy Diller created a spectacular snow globe card for the challenge and filled the shaker area with a hybrid house (House Pivot and Holiday House), evergreen trees and snow. Then, as an extra special touch, she put lights behind the windows that activate when you press the base of the globe. Brilliant!
Karen Aicken departed from her predicted favorite, the Spiral Circle Pull Card, and chose the Sleigh Gift Card Holder instead. She put it to great use by substituting her own amazing decorations instead of the sleigh. I love the sweet snowman and the clever pail full of snowballs. So much awesomeness!
Caz Counsell mentions that her "go-to" die is the Katie Label Pivot Card. This was from the first collection three years ago but the generic labels are timeless, as Caz shows with brilliance on this card. She cut two pivot cards into a larger card and decorated with several sets, including Rudy the Reindeer as a white stag. Caz is so talented at styling the Characters - I'm looking forward to her card for next challenge, too!
Raquel Mason says that if she had to pick only one die, it might be the Lorna Label, so she gave it a place of honor on the front of her card. Inside, in true Floridian style, she made a beach-themed holiday scene featuring the Adirondack Chair and Rocky the "Santa" Crab. This card is made of fun!
Summer Hills-Painter created a gold-plated fabulous card! I love the way it shines. Her "all I want" die is the Anita Frames and she embellished with the trees from the Evergreen Pivot Card. Amazing!
Fran Sabad posted her card to the team's group and mentioned that it wasn't a Christmas card but that she has 5 birthdays in December and really needed to make a birthday card. Christmas is, after all, a birthday celebration! The Twist Circle is Fran's choice for "all I want" and she shows the versatility brilliantly by using it to animate a stamped balloon. Love it!
Shelly Hickox is so clever! I love how she used her favorite die, the Iron Fence, to frame a pretty 3D Christmas scene. The Holiday House has been transformed into a 3D house and you can learn how to do it on Shelly's blog. Amazing!
How's that for some amazing inspiration?! Join us for our final Designer Challenge on December 27, 2016. We'll be taking on a theme chosen by Sandy Diller of "Party Animals" where we use any of the 20 Character dies for a card celebrating New Years or anything else.
I'll be back to my "Christmas Version" series tomorrow, but I needed to change gears to make a card for my friend Rebecca's baby shower yesterday. She's expecting twin boys and went with a cowboy theme for the shower.
I went stash diving to find some papers that matched the cowboy theme - a red paisley, red dot and blue gingham. I also found some ribbon that looked like denim and some cowboy boot charms. The card measures 4.25" x 5.5" when folded, making it fit nicely in an A2 envelope.
The interactive die is the Katie Label Pivot Card and I cut one of the smaller decorator labels out of the center of the left label to be able to dangle the Props 6 cowboy hats in the opening. As the card is opened the label starts to pivot.
I computer-generated a greeting and cut it out with the decorator labels that come included with the set. I used twine to create a lasso.
This is a simple card design that uses just two dies. It could be easily adapted for a single baby/child by dangling one cowboy hat in the opening instead of two.