Dec 2016 Pop it Ups Designer Challenge #1: All I want for Christmas
Dec 2016 Pop it Ups Designer Challenge #2: Party Animals!

Christmas Version - Twist Circle Panel Card with Evergreen Pivots

This month I've been revisiting some of my favorite technique videos and making Christmas versions of the cards. Today's share is an amped-up version of the Twist Circle Panel Card where I added two Evergreen Pivot Card cuts into the panels, giving it an extra layer of interactivity.

TwistCirclePanelEvergreensBoth
This card is a top-fold A2 (4.25" x 5.5") but because of the bulk, it will need a larger envelope and extra postage. I kept the front very simple, with a stamped layered label set (Labels & circles), ribbon and some evergreen trees (Evergreen Pivot Card). 

TwistCirclePanelEvergreensClosed
As the card is opened, the panels start to twist and lift up. I made sure that my ribbon bow was high enough that the twisting labels will not hit it.

TwistCirclePanelEvergreensPartial
Once the card is opened fully, the panels will expand and the trees pop-up, creating a fun zigzagging double pop-up. 

TwistCirclePanelEvergreensOpen
To create the burlap/glittered trees, I first added double-sided adhesive to a piece of cardstock and then pressed a piece of burlap into the adhesive. I die cut the decorator trees using the Precision Plate in my Big Shot to make sure it would cut the burlap and cardstock completely. After die cutting I poured glitter through the burlap to stick to the leftover adhesive. I alternated between two colors of glitter (Imperial Garnet and Light Brass) to give the line of trees some variety. The Evergreen Pivot Card includes a die to cut stars for the tops of the trees.

TwistCirclePanelEvergreensCloseUp1
The patterned paper I used is a very old piece of Lily Bee Design paper (Jingle egg nog) from my stash. I used the smaller snowflake die from the Holiday Charms set to die cut the maroon snowflakes from the leftover patterned paper and sprinkled snowflakes throughout the card. The Merry Christmas stamp is also an older design (Stampendous) from my stash. I stamped and embossed it onto maroon cardstock and then cut it into a tag shape.

TwistCirclePanelEvergreensCloseUp2
From the side you can really see the layers of dimension to this card. The outer two panels are connected to the arms of the Twist Circle Panel Card in the usual manner. The label on the base of the card is inlaid so make sure it is not a catch point. I embossed the "Dec 25" stamp and left room to sign the card with a white gel pen.

TwistCirclePanelEvergreensSide
For the Twist Circle Panel card itself, I followed the video instructions, with these changes to the dimensions:

  • Backing Card: 4.25" x 11", scored for folding at 5.5" (making an A2 top fold card)
  • Inner Card: 4" x 10.75", scored for folding at 5 3/8" (center)
  • Arms: 1.25" x 4.5", scored for folding lengthwise up the center
  • Interior Pop-up Panels: 10" x 3", scored at 2.75", 5" and 7.25" to make four panels (outer two panels are 2.75" wide and inner two panels are 2.25" wide) with corners rounded with 1/2" radius

Here are some step-by-step photos for how to cut the Evergreen Pivot Card die into the panels. 

TCPC Evergreen Step1
Step 1: After scoring to make the 4-panel strip, line up the Evergreen Pivot Card alignment nubs on the right-most fold line, using temporary adhesive to hold the small trees in place. Fold the other three panels underneath as shown above. Roll through a die cutting machine to die cut the small trees through two panels.

TCPC Evergreen Step2
Step 2: Open the panel set up and move the die to the left-most fold, taping down the small trees so they don't shift. Fold under the left-most panel and pull the small tree that is already die-cut over the top of the die so it won't be cut again. Roll through the machine.

TCPC Evergreen Step3
Step 3: Turn the panel set over so you're working on the back of the piece. Use clear tape to join the small trees in the center. Add cardstock panels to the outside edges. The panels should measure 1.25" wide by 3" tall.

TCPC Evergreen Step4
Step 4: Turn the panels back to the front again. Start working the folds between the trees to create the pop-ups as shown. You'll have to create your own fold between the two outermost trees. This can be scored if you prefer, but I just used my fingers to create the folds.

TCPC Evergreen Step5
Step 5: Turn the panels to the back again. Cut four cardstock strips, each measuring 1.5" x 3" and add them to the back of the panels. Make sure the adhesive is added to the panels so you can avoid the tree areas with adhesive.

TCPC Evergreen Step6
Step 6: Decorate the panels as desired. I used washi tape (stash item) across the top and bottom edges of my panels and then rounded the corners with a 1/2" corner rounder. To add the small burlap trees in the very center, the interior side of each tree had to be trimmed so it wouldn't cross the fold. 

Once I had my panel set completely decorated, I followed the video instructions for creating the base of the card (Twist Circle) and adding the panels. I reinforced all of my arms with patterned paper (this is shown in the video).


Ready to give this amped up version of the Twist Circle Panel Card a try? Here are the items from my Christmas Version that I was able to source. 

Comments